• Dust all surfaces
• Wipe down all surfaces
• Sanitize high-touch areas
• Empty all bins and wipe down outside of bin
• Vacuum and mop all floors
• Clean appliances
• Sanitize countertops
• Empty and clean inside and out of fridge
• Clean sink and faucet
• Clean tables and chair
• Clean the vanity & basin
• Wipe exterior of all cabinets & drawers
• Mirrors & glass cleaned
• Toilets cleaned
• Refill Supplies
• Dust and clean all tables & chairs
• Wipe/dust window sills, ledges and blinds
• Wipe down electronic equipment
• Dust and clean all surfaces

• • Remove all dust from all superficial, walls, counters, etc
  • Vacuum the entire house two times
  • Remove the dust again after the first two vacuum
  • Wipe down all closets, cabinets in/outdoors
  • Baseboards
  • All interior windows, including the window sill
  • Map the floor 3 times, removing all residue and dust
  • Doors must include door handles etc

• • Inspect carpet for stains, damage, or high-traffic areas

  • Remove furniture and loose items from the area

  • Vacuum thoroughly to remove dust and debris

  • Pre-treat stains and heavily soiled spots

  • Apply appropriate carpet cleaning solution

  • Deep clean using steam or extraction method

  • Rinse and extract excess moisture

  • Allow carpet to dry completely

  • Perform a final inspection and spot clean if needed

• Remove dust, cobwebs, and loose debris from frames and sills

• Prepare a streak-free cleaning solution

• Scrub the glass to loosen dirt and buildup

• Squeegee from top to bottom for a clean finish

• Wipe edges, corners, and frames with a dry cloth

• Clean window tracks and sills

• Inspect glass for streaks or missed spots and touch up as needed

• • Inspect the roof for damage before cleaning

  • Remove loose debris such as leaves and branches

  • Clear gutters and downspouts

  • Apply appropriate cleaning solution for moss, algae, or stains

  • Gently clean roof surfaces using soft washing or low-pressure methods

  • Rinse thoroughly to remove residue

  • Check flashing, vents, and seals for issues

  • Ensure surrounding areas are clean and debris-free

  • Perform a final inspection for missed spots or damage

• • Inspect gutters and downspouts for damage

  • Remove leaves, dirt, and debris by hand or with a scoop

  • Flush gutters with water to clear remaining buildup

  • Check and unclog downspouts

  • Ensure gutters are securely attached and properly aligned

  • Inspect for leaks, cracks, or rust

  • Clean surrounding roof edges and ground area

  • Perform a final check to confirm proper water flow

End of Tenancy Cleaning Checklist:

• Remove all trash and personal items

• Dust and wipe all surfaces, shelves, and skirting boards

• Clean doors, handles, switches, and sockets

• Vacuum carpets and mop hard floors

Kitchen:

• Clean oven, hob, extractor, and appliances

• Wipe cabinets inside and out

• Clean countertops and sink

Bathroom:

• Deep clean toilet, sink, bath, and shower

• Remove limescale from tiles and fixtures

• Clean mirrors and disinfect surfaces

Bedrooms & Living Areas:

• Clean wardrobes and storage spaces
• Wipe windows, frames, and sills
• Perform a final inspection to ensure the property is move-out ready
•  

• • Inspect surfaces for damage before washing

  • Remove loose dirt, debris, and obstacles from the area

  • Cover or protect plants, outlets, and nearby fixtures

  • Select the correct nozzle and pressure setting

  • Apply detergent or cleaning solution if required

  • Pressure wash surfaces evenly, working from top to bottom

  • Rinse thoroughly to remove residue

  • Check for missed spots and touch up as needed

  • Clean and store equipment after use

• • Inspect solar panels for cracks, damage, or loose wiring

  • Turn off the solar system before cleaning

  • Remove loose dust, leaves, and debris

  • Use soft brushes or microfiber tools to avoid scratching panels

  • Apply clean water or approved solar cleaning solution

  • Gently wash panels without high pressure

  • Rinse thoroughly to remove residue and spots

  • Check panel edges, mounts, and connections

  • Ensure panels are clean, clear, and operating efficiently